What's Inside The SOLPOD?

What's Inside The SOLPOD?

solpod

The SOLPOD is an incredibly convenient, simple to use, and easy to conceal vape sold by Helio Supply. The SOLPOD EXPRESS KIT includes two 510 magnetic threads, one express battery, one user manual, 1 charger cable (USB to micro USB), and a luxury SOLPOD bag.

There are a few things that must be done before using the SOLPOD. It’s good practice to check the charge when it comes out of the box. The SOLPOD leaves the factory with a charge but it is best to start charging upon opening and before initial use. The charger cable will work wherever you can plug in a USB cable. 

Plug your device into the charger cable and the LED indicator will light up green when it is above 70% charge. Once there is sufficient charge on the SOLPOD, screw one of the magnetic threads onto the Flow cartridge and drop it into the battery. 

It’ll click when it’s connected, and it’s ready to vape. Easily enough, it just takes 5 clicks to turn it on and off, and 3 clicks to change the heat settings. Heat settings are green (low), yellow (medium), and red (high). It also comes equipped with a two-click preheat settings for when your oil is cold, viscous or your cartridge has small intake holes. Choose a heat setting, and enjoy! When finished, simply click 5 times to turn the SOLPOD off. The SOLPOD truly could not be more user-friendly!


To shop our SolPod Click Here


You can also read our related blog post about SolPod:

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.