Smart Bar User Manual
How To Use Your Smart Bar:
⚙️ Getting Started
Power On/Off
To turn your Smart Bar on or off, simply click the button 5 times quickly. You’ll see the LED indicator flash, confirming your device is ready to go or powering down.
🚀 Using Your Smart Bar
Activate Function
There are two easy ways to activate the Smart Bar:
-
Hold the button down while inhaling
-
Or simply inhale directly, and the device will automatically engage
🔁 Reheat Mode
Need a quick refresh of your cartridge? Just:
-
Press the button twice quickly (2x) to enter Preheat Mode
-
The device will preheat for 8 seconds at 1.8V
Perfect for thicker oils or cold starts!
⚡ Voltage Control – Your Way
Standard Voltage Adjustment
-
Press the button once (1x) to cycle through the default voltage settings:
-
1.2V
-
1.8V
-
2.4V
-
3.2V
-
4.0V
-
Precision Mode
Looking for more control?
-
Press the button 3 times (3x) to enter Precision Mode
-
The screen will flash
-
Then:
-
Press once to adjust voltage by 0.1V
-
Or hold the button to quickly scroll to your perfect temperature
-
💡 LED Light Indicators
Your Smart Bar keeps you informed at a glance with smart LED alerts:
Low Voltage Warning
-
Red light flashes 10 times
-
Device enters standby mode
-
Happens when battery drops below 3.2V
Charging Status & Safety
-
Use a standard 5V / 0.5A charger
-
Includes overvoltage protection
-
⚠️ Do not use the device while charging
Charging Time: Approx. 80 minutes
🛡️ Built-In Safety Protections
This device is designed with your safety in mind. Here are the key protections you should know about:
Vaping Timeout
-
Red light flashes 4 times
-
Triggered if session exceeds 10 seconds
-
Device enters standby mode
Short Circuit / Resistance Overload
-
Red light flashes 3 times
-
Device will shut down automatically
No Cartridge Detected
-
White light flashes 3 times
-
Device enters standby mode
That’s it! You’re now ready to take full control of your Helio Supply Smart Bar. Stay safe, vape smart, and enjoy the experience!
Got more questions? Drop them in the comments or check our support page for more tips and troubleshooting.
