WE ARE NOW HAPPILY DONATING A PERCENTAGE OF ALL PURCHASES TO THE LAST PRISONER PROJECT

Search our shop

Our cleanest cartridges to date!

The All-Glass Series is designed to have no metals come into direct contact with your extracts. The only metal present inside the cartridge is the Kanthal coil inside of the ceramic core at the base. The quartz glass tank and centerpost combine to create cleaner tokes and unparalleled flavor!


SHOP NOW

Featuring ceramic coils that are more porous than the average ceramic atomizer which allows for more efficient vaporization to occur on low temperature settings.

This product beats industry standards for heavy metals testing at 5 times less than the California Standard. Meaning, the Flow Cartridges pass as one of the cleanest metal-post cartridges available in the market.


SHOP NOW

For those seeking a cartridge that excels in taste and can amplify any extract without sacrificing reliability or performance. Our Quartz Press Tips use our newest quartz coil technology to produce a cartridge superior to ceramic in both heating and purity. The quartz atomizer heats up more evenly allowing for stable powerful tokes from the beginning to the end.


SHOP NOW

Single-use pen ready to be filled with your extract of choice for personal or commercial use. Features a quartz glass cartridge tube with dental-grade (shatter-resistant) ceramic centerpost and tip.

Uniquely features the ability to recharge (using a micro USB cable - included) so you can rest assured you will have enough battery life for the very last drop.


SHOP NOW

SolPod Express Kit User Guide | Instruction Manual

  • 1 min read

Atomizer Installation Instructions:

  1. Screw the magnetic adapter onto the atomizer. 
  2. Insert the atomizer into the battery box mod.
  3. Press the button. Use it when there is continuous lighting.

Key Description: 

  1. Click the button 5 times to turn the SolPod on/off
  2. Smart Preheat Function: Click the button 2 times to activate the preheat setting, the red light will slowly blink for 15 seconds unless the button is pressed.
  3. Adjust the voltage level: Press the button 3 times quickly to adjust the voltage level. 4.1v (Red), 3.3v (Yellow), 2.6v (Green). 
  4. Over discharge Protection: When vaping longer than 8 seconds the LEDS will flash 6 times and the SolPod will stop outputting heat until the button is pressed again. 
  5. Charging Indication: The LED will indicate the corresponding capacity as following; fully green when fully charged, green >70% charge, yellow 30-70%, red is <30%.
  6. No-load indication: The LED will flash 3 times with no output if it does not detect a cartridge connection. 
  7. No Power indication: The LED will flash 8 times and power off when out of batteries. 
  8. Charging port: Supports Micro-USB charging styles
  9. Protection Functions: The LED will flash 3 times quickly when the atomizer detects a short circuit.

**Overheat protection: The LEDs will flash 3 times when the PCBA detects overheating.

**Overcharge protection: The SolPod automatically stops charging when fully charged. 

  1. Atomizer Resistance Range: 1-3.0 ohm
  2. SolPod is not fully charged when leaving the factory. For best results please charge before use!