SolTorch Wax Pen Kits Specs and Instructions

Components in SolTorch Wax Pen Kit

1x Mouthpiece

1x Ceramic bucket with 4 quartz coils

1x single quartz coil 

1x Protective cover for Bucket

1x SolTorch Wax Pen (1000mah)

1x Protective cover for single quartz coil 

Product Specifications

1. Size 20*112mm/123mm (including mouthpiece)

2. Weight: 76.2g

3. Battery Capacity: 1000mah

4. Puffs: about 100 

5. Vaping Style: Button activated

6. Resistance: 0.5Ω

Vaping Style #1

1. Add wax into the ceramic bucket with 4 quartz coils to the suggested level marked by the fill lin;

2. Reinsert the heating chamber cover

3. Twist the protective cover and mouthpiece back onto the battery, press the fire button and begin vaping. 

Vaping Style #2

1. Twist on the single coil component onto the battery

2. Reapply plastic mouthpiece to opposite end of SolTorch

3. While heating the wire, gently touch the coil to the wax and begin vaping

Operation Instructions

Power on/off: Click button 5 times

Output Power Regulation (LED Indicator):To switch between power levels, press the button 3 times. 

High Power:Stable 25W (Red Light)

Medium Power:Stable 20W (Green Light)

Low Power:Stable 15W (Blue Light)

How to Charge

1. Plug-in the USB Charger into the charging port

2. LED indicator will stay red when charging and will turn green once the battery is fully charged. 

3. Full charge time is about 2.5 hours

Intelligent Protection Functions

Short Circuit Protection:When a short circuit occurs the LED will flash 3 times. 

Over Discharge Protection:When the voltage is lower than 3.0v, the LED indicator will flash 10 times and there will be no output power.